General Info

At Aqua Dip we can coat almost any form of substrate in addition to providing our "SHOW" quality finishes.
This process looks a lot better on a smooth surface than it does on a textured surface particularly if you are looking for a high gloss finish.   

Textured surfaces can be filled and sanded if necessary. All this can be applied on almost any 3D substrate and can be finished in a high gloss, satin gloss or matt gloss clear coats.

This is the same process used to decorate the interior trims of most modern vehicles today. In fact almost every wood grain finish that you see in today's motor vehicle was applied by using the same process.

It is a process which links patterns, design and colour to be transformed onto any 3-dimensional surface.

This process IS NOT A STICK ON APPLICATION so there is no fading, cracking, peeling, blistering or loose edges that can lift away.

The key element to producing any quality finish is surface preparation especially before we apply the foundation layer of primer coats. This is one of the most important part of the process because if it isn’t performed in the right way you could experience faults further down the track.

All parts that we receive are washed from any surface contamination, rinsed, dried, sanded, and prepared ready for the Aqua Dip process.

We can coat all types of metals, plastics, ceramic and fibreglass surfaces.

If you look In gallery 1, 2, 3, & 4 you will find some of the parts we have worked on in the past.